Custom Half Round Shade Builder

Build your own Custom Half Round Shade design with your preferred material, color, and size. Best Custom Half Round Shade design for your home, office or personal space

custom half round shade

FABRIC/MATERIAL TYPES:

Please browse through our in-stock fabrics by clicking on the link below. Be aware that every monitor and printer displays the same color differently. It is always prudent to verify your fabric color and selection by ordering a swatch.

VIEW MATERIAL GALLERY

COMMON FITTER COLORS AVAILABLE:

Use the Special Instructions to designate the color that you are looking for or if you would like an enamel color that you don’t see here:

nickle
Enamel White
Enamel Black
Brass
Enamel Cream

    MEASURING YOUR FITTER TYPES:

    In general, your fitter drop is the distance from the “top of the lampshade” to the ring (fitter) that attaches to your lamp base. In some instances, the fitter might “rise from the bottom”. For these cases, please note in the ‘Special Instructions’ that your “DROP” inches are actually “RISE” inches and that the spider is on the bottom.

    washer
    washer
    euro
    UNO20AND20420DROP.png

      COMMON FITTER TYPES AVAILABLE:

      In our Custom Half Round Shade page, If you don’t see your fitter listed below, please give us a call. We have our own welding department and can make just about anything! If your fitter selection is CHIMNEY RING, please note in the ‘Special Instructions’ what your ring dimensions are. If your fitter selection is REFLECTOR NOTCHES, please note in the ‘Special Instructions’ what the dimension of the outside of your glass bowl is. In either of these special cases, it would be very helpful to send us a photo graph of your Chimney or Bowl with a tape measure stretched across the top.

      washer
      cut washer
      reflector bowl
      uno socket
      uno ring
      chimney ring
      euro socket
      euro fitter
      edison clip
      flame clip

        TRIM OPTIONS AVAILABLE:

        There are 3 basic trim options and then variations in Custom Half Round Shade which are: (1) Traditional 1/2″ trim, (2) Modern Rolled Edge trim, (3) Rustic Whipstitch trim. Please NOTE: We no longer make matching trim for Customers Own Material. The primary option is ‘Rolled Edges’, but we can also attempt to find the closest matching (or contrasting) trim from our stock trim options. Also, we can accept Customer Supplied Trim as long as it is cut-on-the-bias and not an inflexible ribbon type of trim.

        whipstitch
        WColor7.png
        VS4.png
        TraditonalTrim5.png
        Rolled3.png
        Rolled2-300x217-1.png

          OPTIONAL DIFFUSER:

          Diffusers are the pieces of acrylic or polystyrene that sit in the top or bottom of the lampshade and (literally) diffuse the light bulb’s direct light. Diffusers often are placed in the bottom of pendant lampshades when the lampshade sits above eye level, but can go in just about any lampshade. Acrylic diffusers are (by far) the most common type and are a milky white. Polystyrene diffusers are the same material used in the lampshade sides and are normally made in matching or contrasting material to the lampshade. Typically, if a white diffuser is desired, acrylic is used. If choosing a polystyrene diffuser, please put a note into the ‘Special Instructions’ area for your desired color (white, matching, or contrasting). Diffusers are optional and are not typical.

          AcrylicDiffuser-1-1-300x300-1.png
          acrylic diffuser
          AcrylicDiffuser-3-With-Light-2-300x300-1.png
          PolystyreneDiffuser-1-2-300x300-1.png
          PolystyreneDiffuser-2-2-300x300-1.png
          PolystyreneDiffuser-3-2-300x300-1.png
          PolystyreneDiffuser-4-With-Light-3-300x300-1.png

            SPECIAL INSTRUCTIONS:

            We pay close attention to ‘Special Instructions’. Please use the ‘Special Instructions’ area to give us any additional specifications or instructions regarding your Custom Half Round Shade. You can also use this area for any questions or comments that you might have.

            PRODUCTION LEAD TIME:

            Production Lead Time represents the number of business days it takes us to manufacture your Custom Half Round Shade. Orders placed after 2pm Central will be processed the next business day. If any requested lampshade specifications affect the production lead time noted, you will be contacted for options. Production Lead time begins when all customer-supplied materials (if any) arrive at the factory location. PLEASE NOTE: It will take additional time to ship your empire lamp shade from our location to you. Our Custom Half Round Shade all ships via FedEx Ground Shipping – if you need faster shipping, please contact us or put your instructions into the “Special Instructions“ area to the left. If you have a shipping account or a specific carrier you would like us to use, please let us know.

            Disclaimer:

            Because our Custom Half Round Shade is made to order, they cannot be returned. Please read Returns & Exchanges, Privacy policy, and terms and conditions carefully. If you have an issue with your Custom Half Round Shade, feel free to contact us by phone or email and we will work swiftly to get your issue resolved within our power to do so. All shipping times are an estimate and do not constitute a guarantee for the delivery date of your order. If there is a delay in your order you can also feel welcome to contact us with any questions. Royal Lampshades is not financially responsible for refunding your order if it is considered to be “buyer’s remorse.” If there is a defect in your order you may request a new one to be made or receive a refund on your order within 24 hours of you receiving your designed Custom Half Round Shade. If we are out of materials or have questions we will contact you as soon as possible. Please note that anything of this nature may cause a further delay in your order and you will be informed if such a delay might occur.